Renew Crete Systems Products
Recoat - Broom Finsish

Recoat - Broom Finsish

Recoat - Broom Finsish
Re-Coat System:
This system is designed to make old concrete look new again leaving a broom finish like when it was first poured. The only tools needed to apply this product are a squeegee and a concrete broom.
Spray Coat System

Spray Coat System

Spray Coat System
Spray Coat System:
This product is typically shot out of a hopper gun and applied over stencils or tape, leaving a pattern behind when lifted up.

If you would like to see all of our stencils, visit: www.ConcreteStencilsOnline.com
Stamped Overlay System

Stamped Overlay System

Stamped Overlay System
Stamped System:
This system option consists of either stamping an impression into a 1/4th or 3/8th inch thick stamped overlay mix or by stamping an impression into freshly poured concrete.
Stain Systems

Stain Systems

Stain Systems
Concrete Staining System:
This system consists of two different types of stains for concrete. Either the typical acid stain is available for use or if you prefer to be a little more “green,” there are the new Enviro-stains…a water-based color staining system that is easy to apply with no acidic fumes and will dry within a couple of hours which can then be sealed immediately without the need to neutralize the products first.
Concrete Countertops

Concrete Countertops

Concrete Countertops
Concrete Countertop System:
Although not new, the installation of concrete counter tops is still on the rise in the decorative concrete market. If you are looking for something new and original to offer your customers, this may be for you.

Local:  407-678-4885
Fax: 407-678-3275

Copyright © RubberDek, LLC
6869 Stapoint Ct., Suite 115 / Winter Park, FL  32792
PH: 407-678-4885  /  Fax: 407-678-3275